pro zadní stranu
Materiál: použitá ocel s vysokou pevností v tahu Chromoly
Velikost: 420
NORMALSize: 30 T
* Informace od výrobce.
pro originální ladění!
Typ:
37T
popis:
zadní řetězové kolo s řadou zubů line-up a rozumný postup pro nejlepší ladění.
■ vysoká pevnost v tahu z oceli s vysokou trvanlivostí je přizpůsobena.
■ zkontrolovat každých 1000 km a vyměnit je, když se zjistí zkosení. doporučuje se každodenní údržba jako mazání olejem.
Poznámka:
■ 420
For rear
Material: Chromoly high-tensile steel used
Size: 420
*The drive / driven sprocket is a consumable item.Check the sprockets every 1000km as a guide for general riding.(If the tip of the tooth has become thin, please replace it.The life of the sprocket and chain can be greatly improved by daily lubrication.)
*The number of rear sprockets T ÷ the number of front sprockets T = deceleration ratio The higher the value of this deceleration ratio, the more acceleration is emphasized, and the lower the value, the more maximum speed is emphasized.
*Z125 PRO is not compatible with 25T driven sprocket (rear).
*If you change the number of teeth to other than the stock number, the speedometer display will show an error.In this case, use the speed pulse conversion unit (762-4030100).
*Depending on the model of vehicle, the number of T's that cannot be installed or the guide plate may need to be replaced or a speed conversion pulse unit may need to be installed.Please refer to the compatibility chart for details.