• Velikost 6L
Velikost : Celková délka Přibližně 255 x Celková výška 145 x Celková šířka 110 x Šířka ocasu Horní 30 x Šířka ocasu Dolní 55 x Výška ocasu 100 cm
Materiál : Polyester 100%
Zahrnuté části : Skladovací taška
* Produkt je pouze orientační.
* Neexistuje žádné tepelně odolné zpracování. Nepoužívejte je bezprostředně po jízdě.
■Size 6L
Size: Overall length 225 x 145 x 110 x Tail width 30 x Tail width lower 55 x Tail height 100cm
Quality Labeling: 100% polyester
Cover with front and rear locking holes
Equipped with one-touch wind skipping prevention belt
Sewing part with watertight tape
Air ventilation for mirrors on both sides
With hem-straightening function
Comes with a storage bag
Please do not use immediately after driving.
*The shape of the body of a motorcycle varies greatly depending on the model.The dimensions shown are for reference only.
*The product may not be applicable to some models and years.
*If your vehicle is not listed in the application chart, please refer to the dimensions of each part.
*The fabric of the cover is waterproofed on the surface, but rainwater may penetrate through the seams because it is a sewn product.Not fully waterproof.
*The lifetime of the cover depends on the climate and operating conditions.Regardless of the period of use, if the water repellency of the cover decreases significantly, it is the end of its life and you should purchase a new product.
*Be sure to remove the wet cover and dry both the bike and the bike cover before use.Leaving the paint on the surface for a long time can damage the surface of the paint and cause rust and mildew.
*When repainting, make sure that the paint is sufficiently dry before covering.(Dry for 3 months for normal paint and 6 months for metallic paint.)
*In case of strong wind, there is a possibility that the wind chill may enter into the bike cover, so please take enough care of it including prevention of falling.
*We are not responsible for any accidents caused by inadequate use or natural disasters (typhoons, etc.).
*There may be changes in product specifications due to the manufacturer's reasons.