Kloubové lišty zabraňují dešti od SimpsonHelmet a UniversalPliersation.
Ve FreeLine jsme začali vyrábět finskou dýhu z pryskyřicového formovacího kroužku podle originálního šroubu.
Od Speiler na ventilačním otvoru na hlavě od Simvyho Hevyho uživatelského hlasu zabraňuje vniknutí deště a zabraňuje nepohodlí hlavy a zhoršení interiéru v důsledku této inundace.
Můžete jej nainstalovat do požadované polohy pomocí dodané vyztužené oboustranné pásky.
Také může být použita nejen pro praktické aplikace, ale také pro přizpůsobení návrhů.
Také k helmě a krytu kromě SIMPSONu.
Co se týče skutečné korespondence otvoru ventilace, SB 13 a OUTLAW jsou praktickým cílem, ale myslím si, že může být instalován jako Dummy se stejnou barvou černé, matné černé a bílé jako montáž M30.
Jako pocit použití nebylo zjištěno zvýšení zvuku řezání větrem instalací.
I made this screw from billet aluminum instead of the stock plastic screw.
Computer-controlled CNC machining is used for high-precision products.
Even if you install and remove a helmet by coin, it is hard to damage the edge because of depth and accuracy of slit.
The slit is not minus, but plus, so it is easy to work.
There are 6 types of products, including plain aluminum and anodized aluminum.
Anodizing is available in red anodized / clear / black anodized / gold anodized / orange anodized / blue anodized.
[Installation instructions]
In the case of the stock plastic screw, the thread of the plastic screw is slightly deformed due to the combination of the accuracy and the free stop mechanism, but in the case of this screw, the feeling is a little different because it is metal to metal, but please use it in the same way.
As mentioned earlier, the bite is slightly weakened because the screw thread is not deformed, and it moves a little after installation, but there is no problem even if it remains as it is.
If you are concerned about this, please use a low-strength screw adhesive such as Loctite.
*Apply to the thread 5.8 mm when installing and tighten.Do not open or close the shield for a while after tightening.
*The LockTight attachment service is currently discontinued.
*We recommend using a 1-yen coin as the primary choice.This is because aluminum coins work well together. If you don't have a 1-yen coin, you can also use a 10-yen or 5-yen coin.However, please be aware that coins with ridges cannot be used.