[Charakteristický]
Dvojitá vačka MODEL je nástroj pro nastavení vůle ventilu.
Můžete potlačit ventilovou pružinu a vyměnit ji pro nastavení.
[Spec.]
Yamaha? Nástroj SEA BASS pro automobily
[Provozní postup]
1, zaškrtněte políčko Závitová mezera s tloušťkoměrem.
2, když je Clearance mimo rozsah nastavení, zatímco držíte hranu SIDE části R od špičky speciálního nástroje na vnějším obvodu Tappet, zatlačte páčku Tappet dolů pomocí páčky.
V tuto chvíli zabraňte úniku nástrojů na boční stěně držáku.
3, a současně držte stisk tlačítka Tappet, vytáhněte vnější pinzetu Pinzetou a nahraďte ji štítkem Tappet Shim, který se stává regulační vůlí.
Když Shim uvízne s olejem, prosím, udělejte Shim, aby se vynořil z Tappet s nástrojem pro vyjímání ostré špičky.
[Features]
Valve clearance adjustment tool for twin cam models.
Valve springs can be suppressed and shims for adjustment can be replaced.
[Specification]
Valve shim removal tool for Yamaha and Suzuki bikes
[operating procedure]
1. Check the tappet clearance with a sickness gauge.
2. When the clearance is outside the setting range, push down the tappet by using the leverage while hooking the edge of the R part from the tip of the special tool to the outer circumference of the tappet.
At this time, the cam holder side wall prevents displacement of the tool.
3. While keeping the tappet pushed in, pull out the outer shim with tweezers and replace it with a tappet shim that has the specified clearance.
If the shim is stuck with oil, use a pickup tool with a sharp tip to lift the shim off the tappet.