Zadní nosič pro 4 sdílené modely.
Yamaha YZF-R25 a YZF-R3, MT-25 a MT-03 mají společný motor a rám. Přestože se složení těla mírně liší, vyvinuli jsme zadní nosič, který lze nastavit a namontovat na 4 modely automobilů.
MT-25 podle obrazu YZF-R25 a STREETFIGHTER, který přijal Cowling a Design připomínající SUPER SPORTS 750. Obě vozidla jsou štíhlá, ostré a motocykly Sharp s lehkou hmotností a výkonným výkonem.
Zadní nosič je praktické součásti, ale navrhnul jsem to co nejvíce, abyste nezničili Sharp Image.
■ Navržen jako ostrá, pokud je to možné, při zajištění prostoru pro cestující.
Zpočátku jsem se snažil použít rám zadního nosiče až do polohy SeatLimit, aby nedošlo k zničení snímku Tight with Sharp. Stalo se to Designem, jehož cílem bylo, ale když jsem se snažil sedět na cestující, dostal jsem se do stísněného stavu.
Takže jsem ho navrhl mírně širší než první vzorek, takže si dobrý muž sedí na sedadle spolujezdce. Dokončíme Tight bez obětování pohodlí cestujícího.
■ Maximální velká zatížení je 5 kg. Zesilujeme všude.
V poslední době se stále častěji objevují vozidla, která zobrazují SUPER SPORTS 750, která je určena k montáži zadní nápravy a zadní skříně se sadou. Vzhledem k tomu, že některé zadní skříňky velkých rozměrů vážou asi 5 kg, na každou část se aplikuje výztuž a maximální velikost velkého nákladu je nastavena na 5 kg.
Místo výztuže Místo se umístí do rámové části, kde je namontován zadní nosič a výztuž je umístěna také do patní části těla.
■ Tvar dědičnosti, který zdůrazňuje praktičnost a design.
Při instalaci zadní skříňky může být víko uzavřeno bez povolení, pokud je při otevírání víka horizontální,. Tak jsme se rozhodli, že zadní nosné těleso bude mít tvar vzadu. Úhel je přizpůsoben úhlu zadního krytu, takže má pocit jednotnosti.
Instalace je MT-25 / 03 odstraní lištu a nainstaluje ji. YZF-R25 / 3 je nutno provést vrtání části zadního krytu, ale je navrženo tak, aby vrtání krytu bylo nejmenším limitem. Také je dodáván s papírovým vzorem, takže pozice vrtání je snadno pochopitelná.
The rear carrier is available for all four models.
Yamaha's YZF-R25 and YZF-R3, MT-25 and MT-03 each share the same engine and frame.Although the vehicle configuration is slightly different, World Walk has developed a rear carrier that can be adjusted to fit four different models.
The YZF-R25 has a cowling and design reminiscent of supersports, while the MT-25 follows the image of a street-fighter.Both bikes have a slim, sharp image and are lightweight with powerful performance.
The rear rack is a practical part, but World Walk designed it not to destroy the sharp image as much as possible.
■Designed to be as sharp as possible while retaining space for the passenger.
In order to keep the sharp and tight image of the bike, the frame of the rear rack was brought up to the very edge of the seat.The design of the vehicle is as World Walk wanted, but it is too tight for the passenger to sit on.
The passenger seat was designed to be slightly wider than the first sample to allow room for a larger man to sit in the passenger seat.It is a tight fit without sacrificing passenger comfort.
■Maximum loading capacity is 5kg.World Walk is reinforcing every part of it.
Recently, it has become common to install a rear carrier and a rear box as a set, even for super sports inspired vehicles.Some of the larger rear boxes weigh about 5kg, so I reinforced each part of the box and set the maximum load capacity to 5kg.
The reinforcement plate is placed on the frame where the rear carrier is installed, and also on the legs of the main body.
■The shape of the buttocks is designed for practicality and design.
When the rear box is installed, the lid may close by itself if it is horizontal or raised forward when the lid is opened.This is why the rear rack is designed to be raised backwards.The angle of the tail cowl is the same as the angle of the tail cowl, so the design has a sense of unity.
To install, remove the grab bar from MT-25 / 03.YZF-R25 / 3 requires drilling of some parts of the tail cowl, but World Walk has designed the cowl so that drilling of the cowl is minimized.A paper pattern is also included to help you know where to drill the holes.