Jedná se o silné dvojité sedadlo, které lze vybavit OEM sedlem Cowl a které lze namontovat na VŠECHNY MODELY karburátoru / FI.
Šířka sedadla je širší než OEM Seat, takže jízda je pohodlná a noha je podobná jako u OEM Seat ztenčením části chodidla a odstraněním čtvercových rohů.
Když se poloha sedu zvýší, ohýbání kolena se uvolní a jízdní poloha se blíží poloze stoje a zatížení na boky se posune na chodník.
Zvýšením zátěže chodidla se sníží zátěž na boky a je snazší ovládat tělo pomocí chodidla.
Sedadlo, díky kterému je dlouhá cesta pohodlnější a příjemnější.
Použijte injekční houbu vypálenou ve formě.
Má dobré vlastnosti polštáře a malé zhoršení v průběhu času, takže jej můžete používat po dlouhou dobu.
■ Funkce
Obyčejná černá se používá pro celou kůži a středové prošívání je bílé provedení Potrubí.
Je to typ B, kde Stitch Line nakreslí oblouk na cestě a padá dolů.
■ instalace
Pro instalaci na karoserii vozidla je nutné přemístit tlumič sedadel z OEM Seat.
Připojte přiložený držák na stranu palivové nádrže a zadní stranu upevněte pomocí OEM sedla, jako je OEM Seat.
Může být použit s OEM drapákem nebo zadním blatníkem K & H.
Při použití společně s nosičem převodů Y musí být montážní hardware invertován.
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with white piping at the center seam.
The stitching line arcs downward in Type B.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.