[Materiál / materiál]
・ Tělo: Pryskyřice
Šroub: Ocel
[Velikost]
Šířka: Přibližně 33 mm
Výška: 5 / 16-18 Celková délka Přibližně 32 mm
Přibližně 115 mm: přibl. 22mm (Bolt není součástí balení)
Šroub: M6-20 mm
Množství] BodyX1 * Množství: Pár (pro levé a pravé) Množství: Toto není pár.
* Tento produkt je jeden kus. Upozorňujeme, že se nejedná o dvojici zleva doprava.
* Tento produkt je vyroben z pryskyřice se šrouby zapuštěnými do těla. Dbejte na to, abyste šrouby příliš netahali, protože by to mohlo poškodit tělo a část kloubu.
* Šroub může být příliš dlouhý, aby se vešel na některé modely automobilů (Vespa atd.). Před zakoupením zkontrolujte velikost.
* Obrázek obsahuje další barvy a produkty.
* Vezměte prosím na vědomí, že specifikace produktu se může z důvodů výrobce změnit.
[Size]
・Width: Approx. 33mm
・Height: Approx. 32mm
・Depth: Approx. 22mm (excluding bolts)
・Bolt: M6-20mm
[Material]
・Body: resin
・Bolt: Steel
[Components] Main body x 1
*All M&Ms sculptures are handmade, so please be aware of the following before purchasing.
[Aging and Deterioration]
M&Ms license plate bolts and valve caps are finished with paint.
Please understand that discoloration, fading, gloss loss, and deterioration of the coating may occur over time when the product is installed on the bike body.
*Gravel, sand, and rain may accelerate the aging process.
[Early Deterioration]
M&Ms license plate bolts and valve caps are subjected to durability testing and aging/degradation checks for "installation on motorcycles" and "indoor parking lot storage".
The following will accelerate the deterioration of the paint and coatings.
Please refrain from using the product in such environments, or use it with the expectation that it will deteriorate over time.
・Outdoor storage (storage in the rain or sunlight will lead to premature deterioration.)
・Installation and use on bikes susceptible to rain, sand, and gravel, or installation on the front license plate
・Prolonged riding under intense sunlight.
[Durability of paint and body]
・Due to the nature of the resin, the surface coating may have a slight tendency to lift slightly.
・The color of the product may slightly differ from the color of the image shown on the website due to the preparation of the paint each time.
[Neon colors]
M&Ms neon colors are made from special American paints for their high color quality.
They can express pop colors that cannot be achieved with Japanese paints, but their durability and weather resistance are inferior to that of Japanese paints.
Please understand this before purchase.
[Installation notes]
・This product has bolts embedded in the resin body.Excessive tightening may damage the bolt joints and the main unit.
・In the case of a thin part of the molding or a multi-piece structure, holding the connecting parts when tightening may damage the resin.Be sure to hold the thick resin "body" and tighten the nut.
・Some models may not be able to be installed due to the long bolts.(For Vespa) It will take a little time, but we can make it in the size of the desired bolt size, so please let us know.
・May not be used in combination with a license plate cover.
・Installation on cars requires tightening with nuts.
*This product comes in a pack of 1.Please note that this is not a pair.
*Other colors and products may be included in the image.
*There may be changes in product specifications due to the manufacturer's reasons.