433.73 CZK
(2,795 JPY)
5 (10 Všechny komentáře)
Excellent
Although the pack which can be thrown away as it is till then was used, he spilt in many cases and bought the trial.
Since a jack is not used usually, it will spill inevitably only by space grip in case of a pack.
Since it spilt and exchanged when Although the pack which can be thrown away as it is till then was used, he spilt in many cases and bought the trial.
Since a jack is not used usually, it will spill inevitably only by space grip in case of a pack.
Since it spilt and exchanged when it was this, to me, I think that this one is suitable.
It is not necessary to inhale the accumulated oil enough with the milk carton into which the newspaper was torn and put, and it does not need to buy an oil pack.
Origin can be taken if it is used several times!
Reviews For PROTOOLS Olejový odtokový pán From Other Webike User
Excellent
Very useful for all my vehiclesWhen researching the vast variety of oil drain pans available on line at Webike I decided on the style with a spout for easy of pouring the old oil into container for disposal and one with the capacity to not only handle the oil quanity from my motorcycle but also my car. I have used this product serveral times now and can say it is a pleaseure to use and an easy clean up with no mess at the end of the vehicle servicing. The product material is very strong and durable with no signs of weakness. The handles and the spout cap were features I did not consider I needed but make life a lot easier when caring a full pan of oil around the garage. Great designed and manufactured oil drain pan from ProTools. View Detail
Excellent
Quality Oil Drain Pan By PROTOOLSMy original oil drain pan to work on my motorcycle and car was just an old container cut in half to fit into the tight location but would always make a mess when emptying. With this well designed and manufactured oil drain pan I no longer have any issues my old oil into a bottle for recycling. I should have bought one of these years ago as it saves my time and keeps my garage clean during oil changes now.View Detail
Excellent
You can also use it to change oil and wash partsI bought this for Oilfor Replacement I wanted to get a Nozzle type for this type
In the product photo, there is no Cap at the end of the Nozzle, but the product I received has a Cap, and it is also available for storage Oil does not drip
Nozzle's Cap was a nice miscalculation
It's not inconvenient to use, but it's the same with a wider and less heightened oil receiver It would have been better if there was a product that could hold about the same amount of space It would definitely be easier to use that wayView Detail
Excellent
[Webike monitor] The box type oil pan (5L) was conventionally used for the receptacle of an oil change.
However, when it was an oil pan of 5L, was a large-sized motorcycle, and it moved and threw [ having entered with ordinary considerably, and ] away [Webike monitor] The box type oil pan (5L) was conventionally used for the receptacle of an oil change.
However, when it was an oil pan of 5L, was a large-sized motorcycle, and it moved and threw [ having entered with ordinary considerably, and ] away into a milk carton, and it did not do quite carefully, it might spill.
Then, by the motorcycle shop which is going in and out, it saw using this product and opted for purchase.
Since there is capacity of 7L, and the shoot of oil sticks and there is also a canopy top, there is no fear of spilling.
Rather than former, it became very easy to throw away oil and it also shortened time substantially.
By the way, this oil pan height is about 13 cm.
Since old 5L oil pan was 8 cm in height, when removing a drain bolt, a margin decreases for a while rather than a former oil pan.
Probably, it will be easier to use a center stand or a stand on hand in the case of a motorcycle with a low ground clearance.
From the first, in my case, since the stand was used, although there was no trouble in particular, before purchasing this oil pan, it considers that it is better to see the higher vehicle of its own motorcycle.View Detail
Most Viewed Reviews Of PROTOOLS Oil Tray / Oil Tray / Oil Pan
Excellent
Very useful for all my vehiclesWhen researching the vast variety of oil drain pans available on line at Webike I decided on the style with a spout for easy of pouring the old oil into container for disposal and one with the capacity to not only handle the oil quanity from my motorcycle but also my car. I have used this product serveral times now and can say it is a pleaseure to use and an easy clean up with no mess at the end of the vehicle servicing. The product material is very strong and durable with no signs of weakness. The handles and the spout cap were features I did not consider I needed but make life a lot easier when caring a full pan of oil around the garage. Great designed and manufactured oil drain pan from ProTools. View Detail
Excellent
Quality Oil Drain Pan By PROTOOLSMy original oil drain pan to work on my motorcycle and car was just an old container cut in half to fit into the tight location but would always make a mess when emptying. With this well designed and manufactured oil drain pan I no longer have any issues my old oil into a bottle for recycling. I should have bought one of these years ago as it saves my time and keeps my garage clean during oil changes now.View Detail
Excellent
Very useful for Scooter![How is it used?
I bought this for my CYGNUS X SR Model 5 Oilfor Replacement, and the CYGNUS has an exquisite Center Stand in the way.
I bought this product because there is a drain bolt and the Center Stand is too low to fit a large-geometry oil pan.
Was the one you received as per Image?
It's a great product, but I'm not sure if it's the right size for me.
I thought it would be no problem if I could cover the cost. The size is just right for implementation and is easy to use.
How was your experience with it?
It is simple and easy to use. I also use it to change the oil in the circuit of my YZF-R25, which has been converted to a racer.
The only problem is that the sink is still flat, so there is a high possibility of spilling on the Large when you throw it away.
So I'm thinking of either cutting it or intentionally hitting the exhaust pipe to melt it and make it easier to flow.
[Points to note]
As others have mentioned, be careful when you pass the Center Stand through the neck, if it doesn't go in at an angle!
It's fine when you put it in, but after you pull the oil out, you have to angle it to get it out! Then it's a large disaster (laughs).
If the amount you pull out is small, you can go without spilling, but if it's a lot, you will definitely spill.
How did it compare to other products?
I think the square oil pan has a merit that it can be stacked.
If you are using a scooter, the Center Stand will be in the way.
That makes me wonder if it's any other shape than this one!View Detail
Excellent
You can also use it to change oil and wash partsI bought this for Oilfor Replacement I wanted to get a Nozzle type for this type
In the product photo, there is no Cap at the end of the Nozzle, but the product I received has a Cap, and it is also available for storage Oil does not drip
Nozzle's Cap was a nice miscalculation
It's not inconvenient to use, but it's the same with a wider and less heightened oil receiver It would have been better if there was a product that could hold about the same amount of space It would definitely be easier to use that wayView Detail
Excellent
The position of Drain bolt is effective for special Motorcycle!I bought it for Oilfor Replacement of YAMAHA SR 400.
Oil of SR is Dry scattering type, so when removing Oil, Main is pulled out from Oil drain of Front Frame, but Oil remaining in Oil pan needs to be pulled out as well.
However, when setting up the Center Stand and accessing the Oil drain bolt, the installation is sideways, and because of the positional relationship with Center Stand, I felt it was difficult to use it with a general circular object.
So I purchased this PROTOOLS Compact Oil Drain Pan!
It was introduced as Scooter and Small Type for Vehicle, but the capacity is 2. With 68 L, Oil Capacity 2 of SR 400. It was decided that it was enough for 1 L.
Size is also Exactly, it fits in the gap of Center Stand, and it seems to be active in the future Oil replacement work.
Actual size is outside, height 40 cm, side 23 cm, height 7. 5cm. The inside is a deep place where Oil gathers, there are 14 cm in length, 20 cm in width, and 6 cm in depth.
The narrow part that catches the Oil of the tip part is the widest part on the outside is 17 cm and the narrow part is 15 cm.
Besides that, in the inside of a place with grooves vertically, it has a slope of 16 cm in length, 20 cm in width and 13 cm in width..
The feeling put on the floor has a sense of stability and it is very reliable!
Well, it is said that Large doubles as Small, but again "Appropriate material right place, proper use" It is necessary.
Since this time PROTOOLS Compact Oil Drain Pan is newly added, it seems to be able to enjoy Oil replacement work efficiently.
In the photograph, the PROTOOLS Sticker is stuck, but I tried to peel off what was attached to the packed bag.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING